A four-step wizard
Prepare, get the configuration, apply it, connect. Each step is on its own screen, and nothing runs on the router unless you paste it into its terminal yourself.
See what you can sell on it →Every new router is an afternoon in Winbox, and some sites have no public address at all.
Try the live demo
Adding a router to your network means a long session in Winbox: addresses, a tunnel back to your server, RADIUS settings, firewall rules, a hotspot or PPPoE profile. Do it from memory and you'll eventually miss a line. Do it from a template and someone has to keep the template current.
Remote sites make it harder. A tower or a shop behind another provider's router has no public address, so you can't reach it from outside, and you can't manage what you can't reach.
P8 ISP turns this into a guided sequence you can follow without being the person who built the network. The router dials out to P8 ISP over WireGuard, so it doesn't need a public IP. It isn't automatic and it isn't zero-effort. The router is reset and restarted as part of setup, so you back it up first.
Prepare, get the configuration, apply it, connect. Each step is on its own screen, and nothing runs on the router unless you paste it into its terminal yourself.
See what you can sell on it →Setup is for RouterOS 7 and later. The wizard tells you what version the router needs and shows the commands to check and update it, so you find out before you begin, not halfway through.
See how a backup link works →The command you paste is generated for this router, expires after a short time, and fetches the configuration over HTTPS. If it expires, you generate a new one.
See what happens when a line lapses →The platform allocates a management address and creates a WireGuard peer for the router, so the router connects out and stays connected. Your tunnels are listed in one place.
See how monitoring finds a problem →After you apply it, the wizard watches for the router to appear and shows when it has. Recovery instructions for restoring your backup are on the same screen if you need to go back.
See how payments reach the router's users →Back up the router from its terminal and download both backup files. Confirm the router is on RouterOS 7 or later, and update it first if it isn't.
Generate the temporary command in the backoffice, paste it into the router terminal and wait for it to report that it finished. Then run the reset command shown on the next screen. The router restarts, and the internet is briefly unavailable. Existing RouterOS users remain.
The router reaches P8 ISP over WireGuard, and the wizard shows when it has connected. You then add plans and customers.
No. They connect out to P8 ISP over WireGuard.
RouterOS 7 and later. The wizard checks, and shows how to update first if you're on an older version.
Yes. Setup resets and restarts the router with P8 ISP's configuration. Existing RouterOS users remain. Take the backup first. The wizard won't let you continue until you confirm you have.
No. You still paste a command and run a reset in the router terminal. It is a guided setup, and you do the steps yourself.
The wizard includes recovery instructions, and you can restore the backup you took.
A router on RouterOS 7 or later, its terminal in Winbox or WebFig, and somewhere to keep the two backup files you download.
We haven't measured it, so we don't publish a time. Expect to back up, paste, wait for the restart, and wait for the router to connect.
Create an account and follow the wizard on a spare router first.